Herunterladen Inhalt Inhalt Diese Seite drucken

Pureeing - Silvercrest SHMSB 300 A2 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für SHMSB 300 A2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 44
2) Push the whisks
into the slots
until they click audibly into
place and are secure.
ance (labelled with an icon).
hook
the ring on the shaft into the
ance (labelled with an icon).
3) Insert the mains plug
socket.
4) To start operating the appliance, move the speed
switch
to the desired speed setting. You
can select between 5 speed settings and also
use the Turbo button
levels").
5) Press the tool release button
whisks
or the kneading hooks
NOTE
For safety reasons, the whisks
hooks
can only be released if the speed
switch
is set to position "0".

Pureeing

WARNING! RISK OF INJURY!
Never use containers made from glass or
other easily breakable materials. These con-
tainers may be damaged and cause injuries.
6 
GB │ IE
or the kneading hooks
Always insert the kneading
hook
or the whisk
without the ring into the
intended slot on the appli-
Always insert the kneading
or the whisk
intended slot on the appli-
into a mains power
(see section "Speed
to release the
.
and kneading
ATTENTION! DAMAGE TO PROPERTY!
Never use the blender
such as: coffee beans, ice cubes, sugar,
cereals, chocolate, raw/hard vegetables etc.
This could result in serious damage to the
appliance.
Do not use blender
food (e.g. soups). Remove the pot from the
hotplate before puréeing.
with
1) Open the fixture with the safety cover
hold the safety cover firmly.
NOTE
The blender
whisks
installed.
2) Push the blender
it down and tighten it by turning firmly several
times in the direction of the arrow .
3) To avoid overflowing, the container used for
blending should only be filled to about 2/3 of
its capacity. Select a suitably large container
or use the supplied measuring jug
NOTE
In order to ensure that the ingredients are
properly mixed, the food that is being pro-
cessed should cover at least the lower part
of the blender
Do not switch the hand mixer on until the
blender
dients to be blended.
4) Move the speed switch
setting (see chapter "Speed levels") and
press the Turbo button
button
procedure. The appliance stops as soon as it
is released.
for hard foodstuffs
to purée boiling
can only be used if the
or the kneading hooks
into the fixture
.
has been inserted into the ingre-
to the "Blender"
. Keep the Turbo
pressed down during the whole
SHMSB 300 A2
and
are not
, push
.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis