CoolTrans 50 kW
Manual / Bedienungsanleitung
0.
General
The CoolTrans offers temperature control of the cooling water, also depending on humidity and the
hydraulic separation of the secondary cooling water circuit of the cooling water supply from the building.
The CoolTrans serves the cooling water supply of server cabinets in a closed circuit.
The secondary cooling water temperature is controlled via a slip-in valve which is arranged in the primary
cooling water circuit.
The system is completely wired and the control as well as the electrical connection are effected via a
switch box arranged inside the CoolTrans.
1.
Safety
1.1
Safety Symbols
The following symbols refer to certain hazards or provide you with information regarding safe operation.
CoolTrans 50
Warning! Dangerous point! Safety note!
Danger by electrical current or high voltage
Caution! Hot surface
Caution! Rotating parts
Disconnect prior to works!
Warning! Indicates possible damage to the device
Warning! Dangerous voltage
Attention! Indicates possible danger to the environment
Important note, information
01.998.360.0 / Ausgabe -
page / Seite3/73