Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
CoolTrans 50 kW
Manual / Bedienungsanleitung
3.3
Technical Specifications
Identification
Article No.
Transmission capacity
Height
Width
Length
Weight
Piping connection primary (2x)
Piping connection secondary (2x5)
Pressure loss, primary
Lift of pump, secondary, external
Electrical supply
Electrical power draw
Primary volume flow (at 35% glycol)
Secondary volume flow
Spread, primary
Spread, secondary
Nominal pressure, primary
Nominal pressure, secondary
Triggering pressure of safety valve
Content of membrane extension tank
Flow pressure of membrane extension tank
4.
Storage, Handling and Installation
The CoolTrans must only be stored and handled in its completely drained condition.
(possible damage by freezing)
In preparation for shipment ex works, the CoolTrans Unit is placed on a wooden pallet.
A low lift platform truck or a forklift can then take it to the place of installation. Please observe admissible
areas and lumped loads on floors.
When placing the CoolTrans, it must be balanced horizontally by means of its adjustable legs.
Small tolerances in height can be adjusted during installation. (+/- 2.5 cm)
Max. lumped load:
CoolTrans 50
CoolTrans 50
08.009.505.8
50 kW
990 mm
450 mm (19")
820 mm
180 kg
DN 32 Rp 1 !/4" female thread
DN 20 Rp 3/4" female thread
1 bar
0,7 bar
230 V / 16 A / 50 Hz
0,4 kW
8.42m³/h
7.16 m³/h
4 - 8 / 11 - 14°C
12 / 18°C
16 bar
6 bar
3.0 bar
12 l
1.5 bar
53 kg
01.998.360.0 / Ausgabe -
page / Seite11/73
Werbung
Kapitel
Inhaltsverzeichnis
