CoolTrans 50 kW
Manual / Bedienungsanleitung
7.2
Safety Subassembly
Extension tank (ET)
The admission pressure at the extension tank must regularly be checked. (See also Commissioning)
If the extension tank is leaking or defect, it must be replaced.
Fill-in valve
admission
pressure ET
(pV = pstat)
Fig.: Extension tank
Fig.: CoolTrans side view
CoolTrans 50
Extension tank
For tank replacement, close it at
the cap valve and drain it, loosen
the flex hose and pull out to the
front
01.998.360.0 / Ausgabe -
For better tank replacement pull
out the rack and tilt it out
page / Seite26/73