CoolTrans 50 kW
Manual / Bedienungsanleitung
7.3
Pump Replacement
1.
Provide for operation of second pump (redundance)
2.
Pull and tilt out rack
3.
Disconnect from electrical supply
4.
Close lower ball valve "Pump Flow"
5.
Bleed via bleeding screw (upper non-return valve has closed by itself)
6.
Loosening of the four fastening bolts
7.
Replacement of pump motor and running wheel
Pull and tilt out rack
CoolTrans 50
Ball valve
"Pump Flow"
01.998.360.0 / Ausgabe -
Pump-fixing bolts
Bleeding screw
page / Seite29/73