CoolTrans 50 kW
Manual / Bedienungsanleitung
5.
Commissioning of the System
1.
After aligning it, the primary and secondary connection fittings need to be connected to the piping
systems. Outlets that are not required must be closed with blind caps.
Electrical supply connection
Fig.: Electrical connection in the switch cabinet "Power Input"
CoolTrans 50
Four adjustable legs for
horizontal adjustment
Fig.:
CoolTrans 50
Connection of electrical supply lines in accordance with
the circuit diagram in the equipment or with a specified variant
to the terminals in the switch cabinet "Power Input"
01.998.360.0 / Ausgabe -
page / Seite12/73