Bose SOUNDTOUCH 300 Bedienungsanleitung Seite 47

Symptom
Soundbar
doesn't pair with
Acoustimass® 300
wireless bass module
or Virtually Invisible®
300 wireless surround
speakers
Intermittent or no
audio from soundbar
No audio from
Acoustimass® 300
bass module or
Virtually Invisible® 300
surround speakers
Solution
• Unplug the power cords for the soundbar, bass module and
surround speakers, wait 15 seconds and plug them firmly into a live
AC (mains) outlet.
• Repeat the pairing process (see page 17).
• Connect the bass module to the soundbar using a 3.5 mm stereo
cable (refer to the Acoustimass® 300 owner's guide online). If you
don't have a 3.5 mm stereo cable (commonly used for headphones
and mobile devices), contact Bose® customer service to receive this
part. You can also purchase this part at your local electronics store.
• Unmute the soundbar.
• Increase the volume.
• Unplug the power cords for the soundbar and optional bass module
or surround speakers, wait 15 seconds and plug them firmly into a
live AC (mains) outlet.
• Make sure that the soundbar's HDMI™ cable is inserted into a
connector on your TV labeled ARC or Audio Return Channel. If your
TV does not have an HDMI ARC connector, connect to the soundbar
using the optical cable (see page 14).
• If the soundbar is connected to your TV's HDMI ARC connector, make
sure that Consumer Electronics Control (CEC) is enabled in your
TV system menu. Your TV may refer to CEC by a different name. For
more information, refer to your TV owner's guide.
• Disconnect the soundbar's HDMI cable from your TV's HDMI ARC
connector and reconnect it.
• Turn off your TV speakers (refer to your TV owner's guide).
• Insert the optical cable into a connector on your TV labeled Output
or OUT, not Input or IN.
• If your source is connected to your TV:
– Select the correct TV input (see page 28).
– Make sure that your TV can output audio from connected sources
and that audio output is enabled (refer to your TV owner's guide).
– Connect your source to the soundbar and select the appropriate
settings in the SoundTouch® app to play surround sound audio
directly from the source (see page 43).
• Update the system software:
1. On the remote control, press the SoundTouch® button
2. Press and hold the Closed Captioning button
indicator , TV indicator
Bluetooth indicator
Note: The update may take 10 or more minutes.
T R O U B L E S H O O T I N G
, SoundTouch® indicator
on the soundbar blink white.
.
until the Wi-Fi
and
E N G L I S H - 4 7