Setting Up Your Soundbar Using A Computer; Before You Begin; Computer Setup - Bose SOUNDTOUCH 300 Bedienungsanleitung

A LT E R N AT E S E T U P

Setting up your soundbar using a computer

You can set up your soundbar using a computer rather than a smartphone or tablet.

Before you begin

• Position your soundbar next to your computer.
• Make sure your computer is on your Wi-Fi network.
• Obtain a USB A to USB Micro B cable (not provided).
Notes:
• A USB A to USB Micro B cable is commonly used for charging mobile devices. You
can also purchase this part at your local electronics store.
• The USB connector on the back of your soundbar is for computer setup only. The
USB connector is not designed to charge smartphones, tablets, similar devices or
the soundbar itself.

Computer Setup

During setup, the app prompts you to temporarily connect the USB cable from the
computer to your soundbar. Do not connect the USB cable until the app instructs you to
do so.
1. Plug the power cord into an AC (mains) power outlet.
2. On your computer, open a browser and go to:
global.Bose.com/Support/ST300
Tip: Use the computer where your music library is stored.
3. Download and run the SoundTouch® app.
The app guides you through setup.
4. After setup is complete, disconnect the USB cable from your computer and from
your soundbar. Move your soundbar to its permanent location.
4 4 - E N G L I S H