Alternate Setup; Alternate Setup Methods; Connecting A Source To The Soundbar - Bose SOUNDTOUCH 300 Bedienungsanleitung

A LT E R N AT E S E T U P

Alternate setup methods

You may need to use an alternate setup method to resolve the following problems:
Symptom
No available HDMI™ inputs on your
TV for sources
No sound or poor sound quality from
a source connected to your TV
Can't set up the SoundTouch® app
on a smartphone or tablet

Connecting a source to the soundbar

Some TVs have too few HDMI inputs for all of your sources.
If the soundbar is connected to your TV's HDMI ARC connector, you can resolve this
problem by connecting one source to the soundbar's HDMI IN connector with a second
HDMI cable (not provided).
Note: Make sure that the soundbar is connected to your TV's HDMI ARC connector
before connecting a source to the soundbar. If the soundbar is connected to
your TV's optical connector only, you won't see video from the source.
1. Insert one end of an HDMI cable into your source's HDMI (OUT) connector.
2. Insert the other end of the HDMI cable into the HDMI IN connector on the back of
the soundbar.
3. Program the universal remote control to control your source (see page 22).
4. Select your source using the remote control (see page 28).
Note: You must select the TV input to which the soundbar is connected.
4 2 - E N G L I S H
Solution
Follow the instructions for "Connecting a source to the
soundbar" on page 42.
Follow the instructions for "Playing audio directly from a
source connected to the soundbar" on page 43.
Follow the instructions for "Setting up your soundbar
using a computer" on page 44.