Control Panel - Klarstein 10031699 Bedienungsanleitung

Touch panel contains five function buttons:
Timer Light
General Functions
• Power on, the hood will standby with backlight, backlight will be extinguished after 5 seconds without any
operation, for using the hood again, touch any key to wake up it' s standby motion.
• Touch the POWER button for 2 seconds, the hood will slide upwards, and works at the first speed. Touch
the POWER button for 2 seconds again, the hood will slide downwards, and stop working. If you stop the
hood, without stopping the motor, when you open the hood again, the hood will work at the speed it works
last time.
• Press the POWER button, when the hood is coming upwards or going downwards, the hood will stop mo-
ving, with motor keeping running. Press the POWER button again, the hood will move again.
Speed Setting
1. Touch the SPEED button, the motor will turn on; touch it again, it will turn off.
2. Touch this the SLIDE CONTROL, with your finger sliding on it.
• When your finger stops at the first or second point, the motor will run at the lowest speed.
• When your finger stops at the third or fourth point, the motor will run at the second speed.
• When your finger stops at the fifth or sixth point, the motor will run at the third speed.
• When your finger stops at the seventh or eighth point, the motor will run at the highest speed.

Control Panel

Slide control
Functions of the Controls
Speed Power
20