Cleaning And Care - Klarstein 10031699 Bedienungsanleitung

Lamp Replacement
Open the door of the hood, insert the gap by a small screw-driver with "-" type and prize up the lamp (see
pic8). But switch the unit off and pull out the plug first.

Cleaning and Care

Replace and clean the filter
Method 1:
Put the filter into 40-50°C clean water, pour on detergent, and soak for 2-3 minutes. Wear gloves and clean
with a soft brush. Please do not apply too much pressure, as the filter is delicate and will damage easily.
Method 2:
The filter can be put into a dishwasher. Set the temperature at around 60°C.
The filter is made of high-density metal. Please do not use corrosive detergent on it. Keeping this filter clean
will keep the appliance running correctly.
Note:
1. Please do not put anything which can block the up & down of the hood to avoid the damage of the hood and
body injury.
2. Please keep the power off when clean the hood.
16