Kenwood BLM80 Bedienungsanleitungen Seite 5

Ensure that the lid and filler cap are securely in place before
l
every blending operation.
Always ensure that the vents in the filler cap are clear before
l
every blending operation
When fitting the lid to the goblet always ensure that the lid
l
and goblet rim are clean and dry to ensure a good seal and
prevent spillage.
safety
If the cord is damaged it must, for safety reasons, be
l
replaced by KENWOOD or an authorised KENWOOD repairer.
Switch off and unplug:
l
before fitting or removing parts;
when not in use;
before cleaning.
Never fit the blade unit to the power unit without
l
the blender goblet fitted.
Ensure the cord is fully unwound from the cord
l
storage device
Always unplug the appliance before putting your hands or
l
utensils in the goblet.
The blender lid must be fitted when using the stir stick in the
l
goblet.
Only use the stir stick
l
NOT use when processing hot liquids.
Always take care when handling the blade assembly and
l
avoid touching the cutting edge of the blades when cleaning.
Only operate the blender with the lid in place.
l
Only use the goblet with the blade assembly supplied.
l
Never let the power unit, cord or plug get wet.
l
Never use a damaged appliance. Get it checked or repaired:
l
see 'service and customer care'.
Never use an unauthorised attachment.
l
SCALD RISK: Hot ingredients should be allowed to cool to
l
room temperature before blending.
.
q
before using the blender.
s
for processing cold ingredients. DO
r
3