Manufacturer's Warranty - Hilti DC-EX 125/5"M Original Bedienungsanleitung

3. Guide the cutting disc into the work.
You can disable the plunge function with the locking screw.
5.7 Fitting the side handle
▶ Fit the side handle on the desired side.
6 Operation
6.1 Wall and corner accessibility
1. Press the locking catch.
2. Open the front clip more than 180 °.
6.2 Marks for cut positioning
Mark 1 indicates the position of the inner cutting disc or single disc, as applicable.
Mark 2 indicates the maximum slitting width (max. position of the second disc).
6.3 Removing the accessory tool
1. Open the hood. → page 9
2. Open the clamping nut.
3. Remove the diamond cutting disc.
4. Remove the spacer rings.
5. Remove the diamond cutting disc.
6. Use the pin wrench to release the adapter.
7. Press the catch on the angle grinder.
8. Turn the hood radially until it can be removed from the tool.
6.4 Breaking out the fillet
▶ Break out the fillet.
7

Manufacturer's warranty

▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
10 English
Printed: 08.06.2018 | Doc-Nr: PUB / 5128904 / 000 / 02
6
7
8
9
267722
*267722*