Product Information; Safety Instructions - Hilti DC-EX 125/5"M Original Bedienungsanleitung

1.3 Product-dependent symbols
1.3.1 Symbols
The following symbols are also used:
Wear protective goggles while working with the tool.
Wear ear protection while working with the tool.
Wear protective gloves while working with the tool.
1.4

Product information

products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Hood
Generation:
Serial no.:
2 Safety
2.1

Safety instructions

WARNING! Read all safety precautions and instructions in this documentation and the safety
instructions of the approved tools. Failure to follow the safety instructions and other instructions can result
in electric shock, fire and/or serious injury.
Keep all safety precautions and instructions for future reference.
▶ Wear personal protective equipment and always wear protective goggles.
▶ Use respiratory protection to keep residual dust away from the face and airways when working.
▶ Even when the hood is fitted, always use the side handle of the approved Hilti power tool.
▶ Wear protective gloves when changing the accessory tool.
267722
*267722*
Printed: 08.06.2018 | Doc-Nr: PUB / 5128904 / 000 / 02
DC-EX 125/5"M
01
English 7