Pelgrim IDK584 Anleitung Seite 112

troubleshooting
Symptom
The hob is not working
and nothing appears in the
display.
A fuse blows as soon as the
hob is switched on.
The hob only works on one
side.
Continuous beep.
The hob simply switches off.
The hob does not work and a
fault code F1, F2, F3 or F4 is
displayed.
The hob does not work,
the information
displayed.
The hob switches off during
use, 4 dashes are displayed.
A series of small
displayed.
Error code F0.
Error code F5 or F6.
GB 22
Possible cause
There is no power supply
due to a defective cable or a
faulty connection.
The hob has been wrongly
connected.
The hob has been wrongly
connected.
The hob has been wrongly
connected.
You accidentally touched a
On/Off button.
The electrical circuit works
poorly.
The hob is locked.
or is
Something has boiled over
or there is an object on the
operating panel.
or F0 is The electronic circuits are
warm.
Pan is boiled dry or to hot.
Appliance overheated due to
insufficient ventilation.
Solution
Check the fuses or the
electric switch (if there is no
plug).
Check the electrical
connections.
Check the electrical
connections.
Check the electrical
connections.
Switch the hob back on.
Contact the service
department.
See page 16 and 17; Child
lock.
Clean the hob or remove the
object and then continue
cooking.
See chapter on installation.
Let appliance cool down or
continu cooking on a lower
setting.
Check the building-in
situation or contact the
Service Department.