Heizen
If the room temperature controller Vitotrol 100, or similar programmable room
thermostat is connected, then the room temperature is controlled from there.
Observe the separate operating instructions.
Should the room temperature controller not produce sufficient heat (e.g. when
it's very cold), the heating temperature can be changed at the rotary selector
tr .
Warmwasser
When in operation with a separate DHW cylinder, DHW temperature is regula-
ted at the temperature control on the DHW cylinder.
Switching ON:
Set rotary selector tr to the
desired heating temperature.
Switching OFF:
Turn heating rotary selector tr to
9 .
Einstellungen
9