Disposal And Recycling - Scheppach HL1500TWIN Anleitung

Phase inverter:
When connecting to the mains or relocating the ma-
chine, check the direction of rotation (swap polarity in
the wall socket if necessary).
Turn pole inverter in the machine socket. (Fig. 11)
Use a portable safety switch (PRCD) if the residual
current protective circuit (RCD) in the mains power
supply is not provided with a rated residual current of
no more than 0.03 A.
Connections and repairs of electrical equipment
may only be carried out by an electrician.
Please provide the following information in the event
of any enquiries:
• Type of current for the motor
• Machine data - type plate
• Engine data - type plate

14. Disposal and recycling

e equipment is supplied in packaging to prevent it
Th
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types
of material, such as metal and plastic. Defective
components must be disposed of as special waste.
Ask your dealer or your local council.
Dismounting and disposal
The machine does not include any components harm-
ful to health or environment. All the materials can be
recycled or decomposed the normal way.
Charge specialized personnel with the disposal that
is familiar with the possible risks and with the present
manual.
When the machine is not used any more and is to be
disposed of, proceed as follows:
• Cut off the electric power supply.
• Remove all electric cables and bring them to a
specialized public collection facility following your
country's regulations.
• Empty the oil tank, fill the oil in a tight bin and bring
it to a specialized public collection facility following
your country's regulations.
• Take all other machine parts to a scrap collection
facility following your country's regulations.
Be sure every machine part is disposed of follow-
ing your country's regulations.
28 GB