Specific Safety Rules - Coitech ST12 Bedienungsanleitung

Specific safety rules

• If the accompanying stand is not used, the table saw must be placed level on a stable, table-like platform.
The working height must be at least 800 mm.
• When sawing, always stand in front of the table saw and to the left of the saw blade.
• Keep the work area free from foreign objects and potential hazards.
• Inspect the workpiece for nails and screws and remove them before starting to cut.
• This table saw is designed exclusively for sawing wood or similar material.
• Only genuine parts and accessories may be used.
Despite the fact that the table saw has been fitted with all the necessary safety
devices and conforms to relevant safety standards, the following hazards still exist
• Danger to fingers and hands from the rotating blade if the workpiece is not handled properly.
• Danger of the workpiece being ejected because it binds or is guided incorrectly.
• Danger to hearing due to loud noise if the work exceeds the permitted noise level. Personal protective
equipment such as ear defenders must be used at all times.
• Danger caused by a defective saw blade. Regular checks should be made to make sure that the blade
is intact.
• Danger of electrocution if an incorrect mains lead is used.
• Whenever accessories are used, their instruction manuals must also be read and followed to ensure that
they are used in the correct way.
• No matter how many precautions one takes there is still the risk of unforeseen hazards.
• The chances of an accident occurring can be minimized by adhering to the safety instructions listed above.
Guide to Safety Symbols
Read the entire instruction manual.
Always use ear protection.
Always use safety glasses.
3