Coitech ST12 Bedienungsanleitung Seite 2

Table Saw
Art.no 40-8280
Please read the entire instruction manual before use and save it for future reference. We reserve the right for any
errors in text or images and for making any necessary technical changes to this document. If you should have
any questions concerning technical problems please contact our Customer Services.
Safety
• Make sure that everyone who operates the table saw has read and understood the safety instructions.
• The table saw must only be used if it is functioning correctly. Carefully observe all the warnings and safety
instructions outlined in this manual. Ensure that there are no disturbances that may affect workplace safety.
• Ensure that all safety devices are in place when the table saw is used.
• Only use saw blades which conform to EN 847-1.
• Keep all the table saw's safety instructions accessible and in readable condition.
• Make sure that the table saw is standing on a solid foundation.
• Check that none of the electrical cables are damaged and that they are all properly connected.
• Keep children away from the table saw when it is connected to the power supply.
• This product must not be used by anyone (including children) suffering from physical or mental impairment.
This product should not be used by anyone who has not read the instruction manual unless they have been
instructed in its use by someone who will take responsibility for their safety.
• Operators of the table saw must not be distracted.
• If a second person is working next to the table saw to take care of workpieces, the table saw must
be equipped with a table extension. The second person must never stand anywhere but at the end of
the extension table.
• Keep the working area tidy. Cluttered surfaces and benches invite accidents.
• Wear suitable attire. Do not wear loose-fitting clothing or jewellery; they could be caught in moving parts.
Non-slip shoes are recommended for outdoor work. Wear a hairnet or similar if you have long hair.
• Always use safetywear. Wear safety glasses. Use a dust mask or dust filter when working in dusty environments.
• Make sure the blade is fitted the right way round.
• The table saw's safety devices must not be removed or disabled.
• Disconnect the table saw from the power supply before servicing, changing attachments, changing blades
or cleaning the table saw or measuring any workpiece placed on it.
• Disconnect the table saw from the power supply before correcting any potential hazards.
• Dust extraction equipment must be used when creating large amounts of dust.
• Never use blades which are defective, blunt or of the incorrect size.
• High speed steel blades must not be used.
• The riving knife is an important safety device which steers the workpiece and prevents the blade for binding
in the cut and the workpiece from kicking back.
• The blade guard must always be in place when making a cut.
• The blade guard must be horizontal over the saw blade.
• Always use a push stick when rip-cutting narrow stock i.e. thinner than 120 mm. The push stick prevents
hands from coming too close to the saw blade.
• Replace the table insert if it is damaged in any way.
• Switch off the motor and disconnect the table saw from the power supply before leaving the workplace.
• Disconnect the table saw from the power supply before moving it. Make sure that the table saw is
connected correctly before switching it on.
• Servicing and repair work must only be carried out at an authorized service centre.
• All safety devices and guards must be replaced immediately following any repairs or servicing.
• Never let children play with the product.
• Never use the table saw if you are tired or under the influence of drugs, alcohol or medication.
Model ST12
2