Other Connections - Sony TA-VE100 Anschluß An Euro-Av-Buchsen

Other Connections

Usually, the recommended connections shown in
"Basic Connections" give good results.
However, if an unexpected video signal or noise
appears when you turn off the VCR, switch the
function or change TV channels, try the connections
shown below.
For details regarding operations, refer to the separate
manual "Operating Instructions".
However, in the case of Example 1, 2 or 3 below be
sure to press AUX instead of TV to select the TV, and
press VIDEO 2 instead of VIDEO 1 to select the VCR.
Example 1 (for Pay-TV like Canal +)
Make connections as shown below.
TV ANT/CATV
AERIAL IN
TV
EURO-AV
ANT
AV 1
AERIAL OUT
AUDIO OUT
AUX IN
VIDEO 2 IN
Connections Using EURO-AV Terminals
Pay TV
VCR
decoder
PAY-TV
LINE OUT
TA-VE100
speakers
Example 2 (for Satellite Receivers)
Make connections as shown below.
Satellite broadcasts can be tuned using either the TV or
VCR.
TV ANT/CATV
receiver/decoder
AERIAL IN
TV
EURO-AV
ANT
AERIAL OUT
AV 1
AUDIO OUT AUX IN
VIDEO 2 IN
Example 3 (for TV's with one SCART
terminal and no AUDIO OUT terminals)
Make connections as shown below.
You will need the following cord (sold separately).
To TV
(SCART)
TV ANT/CATV
AERIAL IN
TV
EURO-AV
ANT
AV 1
AERIAL OUT
AUX IN VIDEO 2 IN
Dish antenna
Satellite
VCR
LINE OUT
TA-VE100
speakers
To VCR
(SCART)
To amplifier
pin jacks
VCR
LINE OUT
TA-VE100
speakers
GB
F
S
P
G
H
W
I
D
FI
GB
3