Mowing The Secondary Area (01/Nf); Settings; Calling Up The Setting - General; Activating/Deactivating The Button Tones - AL-KO Robolinho 500 Betriebsanleitung

GB
6.3

Mowing the secondary area (01/NF)

1. Lift the appliance and place in the secondary
area by hand.
2. Switch on the appliance with
3. Call up the main menu with

* Settings

4. or
* Sub zone mowing
5. or
6. Select the mowing time with
7. Start the appliance manually with
Depending on the setting: The appliance mows
for the set time period and then switches off or
mows until the rechargeable battery is flat.
After mowing the secondary area, place the ap-
pliance in the base station again by hand.
7 SETTINGS
7.1 Calling up the setting – General
1. Call up the main menu with
Note: The asterisk * in front of the menu item
indicates that it has just been selected.
* Settings
2. or
3. Select the required menu item with
and accept with
4. Make the settings.
Note: The menu items are described in the
following sections.
5. Return to the main menu with
NOTE
Further menu items: see chapter 5.2
"Making the basic settings", page 48.
7.2

Activating/deactivating the button tones

* Key clicks
1. or
2. Activating/deactivating the button tones:
■
Activate
or
Activate the button tones.
■
Deactivate
or
Deactivate the button tones.
7.3

Setting the mowing program

7.3.1 Setting the mowing program – General
1. Call up the main menu with
50
.
.
or .
.
.
or
.
.
:
:
.
* Programs
2. or
3. Select the menu item with
cept with .
4. Carry out the settings.
Note: The menu items are described in the
following sections.
7.3.2

Setting the mowing times

NOTE
There must be at least 30 min. between
programming the mowing times and the
mowing start. If not, the appliance only
starts at the next programmed mowing
time.
In the Weekly Program menu item, the days of
the week and time periods when the appliance
should mow are set. Adapt these settings to the
size of your garden if necessary. If unmown ar-
eas are still visible after approx. one week, in-
crease the mowing periods.
* Weekly Program
1. or
■
* All Days [X]: The appli-
or
ance mows every day at the set times. If
All Days [ ] is shown, the appliance
only mows on the set days of the week.
■
* Monday [X]...* Sunday
or
[X]: The appliance mows for the set
time periods on the set day of the week.
If Monday [ ] is shown, for example,
the appliance does not mow on the re-
spective day.
■
Change
or
spective day [X] or deactivate it [ ],
and set the time periods, type of mowing
and the start points.
2. Make the settings for every day or the re-
spective day:
■
e.g. *[M] 07:00-10:00 [?]: Normal
mowing [M] from 07:00 – 10:00 am with
automatically changing start point 0 – 9
[?].
■
e.g. *[R] 16:00-18:00 [1]: The ap-
pliance starts with edge mowing [R] at 4
pm and moves along the entire boundary
cable. The area mowing then begins at
start point 1 [1]. At 6 pm or as soon as
the rechargeable battery is discharged,
the appliance moves back to the base
station.
Settings
or and ac-
: Activate the re-
Robolinho 500 E/I