Technical Data - IKA EUROSTAR 40 digital Betriebsanleitung

Speed range under nominal load rpm
Speed adjustment
Speed display
Speed setting accuracy
Speed measurement deviation
Max. torque at stirrer shaft
Max. stirring quantity (water)
Max. viscosity
Permitted on time
Nominal voltage
Frequence
Max. input power
Max. output power at stirring shaft W
Protection class acc. to
DIN EN 60529
Protection class
Excess voltage category
Contamination level
Protection at overload
Fuse (on mains plate)
Ambient temperature
Ambient humidity (rel.)
Drive
Clamping chuck-clamping range
Hollow shaft internal diameter
Extension arm (ØxL)
Housing
Dimensions (WxDxH)
(without extension arm)
Weight (with extension arm and
clamping chuck)
Operation at a terrestrial altitude m
 Conical attachment for precision shaft R 6000, screw on stirring tool, (e.g. R 1401).
Subject to technical changes!

Technical data

0/30-2000 0/30-2000
------------------------------------ Stepless ------------------------------------
------------------------------- 7-Segment LEDs -------------------------------
rpm ---------------------------------------- ±1 ----------------------------------------
------- Speed < 300 rpm: ±3 rpm ... Speed > 300 rpm: ±1% --------
Ncm 20
ltr 15
mPas 10000 30000
% --------------------------------------- 100 ---------------------------------------
VAC ------------------ 230±10% (EURO) ... 115±10% (USA) ------------------
Hz -------------------------------------- 50/60 --------------------------------------
W 70 118
42
-------------------------------------- IP 40 ---------------------------------------
----------------------------------------- I -----------------------------------------
----------------------------------------- II -----------------------------------------
---------------------------------------- 2 -----------------------------------------
------------------------ Yes/motor current limitation -----------------------
A ---------------------- T 4 A (IKA
°C ------------------------------------ +5 to +40 -----------------------------------
% ---------------------------------------- 80 ----------------------------------------
-------------------------------- Brushless motor -------------------------------
mm 0,5-10 0,5-10
mm 11
mm ------------------------------------- 16x220 -------------------------------------
---------- Coated aluminium casting and thermoplastic plastic --------
mm 86x208x248 86x208x248 86x208x248 86x208x248 86x208x325
kg 4,4 4,4
------------------------------------ max. 2000 ----------------------------------
0/30-2000 0/30-1300
40 60 100
25 40 100
50000 70000
176 186
84 126 136
Ident. No. 2585100) --------------------
®
0,5-10 0,5-10
11 11
4,4 4,4
0/150-6000
20
20
10000
176
125

11 -/-
5,3
23