Inhaltsverzeichnis
Werbung
2. Go to the "Save field", set it to "ON" and press OK. Press Red, Blue or Green to search channels.
3. After the scanning is finished, press the Exit button to go to view mode.
4.0 Basic functions in view mode
While viewing TV or Radio channels various functions can be applied using your remote control. For example:
A. Standby ON/OFF:
Turns the receiver On/Off.
B. MUTE:
Mutes audio output of the receiver.
C. NUMERIC KEY (0-9):
Change the channel directly by pressing the channel number
F. TV:
Shows the list of current digital TV channels.
G. RADIO:
Shows the list of current digital Radio channels.
Shows the list of your current favourite channels.
I. CHANNEL UP/DOWN:
Change the current channel to the previous/next channel in the TV or Radio list.
J. VOL +/-:
VOL - sets the volume down and VOL + sets the volume up.
K. OK:
You can select an item in the SAT, SUBTITLE or LANG list.
L. MENU:
Shows the main menu for additional settings.
M. SAT:
Displays the list of satellites you have scanned with your receiver.
P. EXIT
Exits from the menu or sub-menu and cancels any functions in progress if applicable
PART 6 • Quick Set Up Guide • English
www.strongsat.com
Werbung
Inhaltsverzeichnis
