Technical Data - Makita UV3200 Original Bedienungsanleitung

ENGLISH
(Original instructions)
DESIGNATION OF PARTS (Fig. 1)
1. Handle
. Cord strain relief
. Upper handle bar
4. Knob
. Middle handle bar
. Lower handle bar

TECHNICAL DATA

Model name
Rated input power
No load speed
Maximum cutting width
Work height range
Grass catcher volume
Protection class
Sound pressure level
Sound pressure level at operator's ear
Measured sound power level
Guaranteed sound power level
SYMBOLS
The following show the symbols used for the machine. Be sure that you understand their meaning before use.
• Read instruction manual.
• Take particular care and attention.
• Double insulation.
• Wear protective gloves.
• Wear sturdy boots with non-slip soles.
• Wear eye and ear protection.
4
. Support
. Air vents
9. Height adjustment lever
10. Defl ector guard
11. Grass catcher
1. Clip (x)
Voltage
Frequency
Net weight
Vibration
13. Lock-off button
14. Start/stop lever
1. Cutting tool
1. Bolt and spring washer
1. Bearing
1. Drive shaft
UV00
230-240V
0Hz
100W
12 kg
000min
-1
0 mm
5 steps (-10/-5/0/5/10 mm)
0L
IPX4
.9dB(A), K=.0dB(A)
.dB(A), K=.0dB(A)
9.dB(A), K=1.4dB(A)
99dB(A)
4.1m/s , K=1.m/s

• Wait until all the machine parts stop
completely.
• Pay attention to sharp cutting tools.
• Switch off the motor and unplug before
cleaning or maintenance, or if power cable
is damaged.
• Objects may be thrown out at high speed.
• Keep safe distance between bystanders or
pets and working area.
• Do not expose to rain or moisture.
• Remove plug from the mains immediately if
power cable is damaged or cut.