Operation; Appliance Type Controls; Temperature Selector; Min Time Switch - AEG VH 206 Gebrauchs- Und Montageanweisung

Operation - for users
4.

Operation

The required room temperature can be infinitely adjusted with the temperature selector. The set temperature of the room air is
then constantly maintained by repeated, brief heating via the thermostat in the appliance.
If you want to use the appliance as a frost stat, turn the temperature selector anti-clockwise as far as it will go. In this position,
the thermostat switches on the heating automatically if the room temperature drops to approx. 6 °C.
Switching the appliance oFF
!
To switch OFF, pull the appliance power plug.
4.1

Appliance type controls

Rotary selector / appliance type

temperature selector

60 min time switch

24 hour timer
4.2 temperature selector
The required temperature range can be set at the temperature selector. When the room temperature falls below the set value,
full heating output switches on, and when the set room temperature is achieved, it switches off again.
Temperature selector
4.3 60 min time switch
The appliance operates in two output stages:
1. In controller mode: The temperature selector is operational; the appliance operates with the standard heating output
of 1000 W.
2. In operation with the time switch: The appliance operates with full heating output until the end of the set time. During this
period, the temperature selector is non-operational. After this the temperature selector takes control of the appliance again.
The operating time selected can be interrupted at any point by turning back the time switch.
60 min time switch
20
VH 206 VH 227 VH 229
x x
x
x
x