Before Fi Rst Use - Silvercrest SHOM 1000 A1 Bedienungsanleitung

Before fi rst use
1) Clean all accessories as described in the section "Cleaning and care" to
remove any production residues.
2) Read these operating instructions carefully.
3) Install the appliance in accordance with the safety instructions.
4) Open the lid 5 with the handle 4 until the lock engages.
5) Remove the inner bowl 0. Clean the inner bowl 0 and the appliance with
a damp cloth as described in "Cleaning and Care".
6) Replace the inner bowl 0 in the appliance so that the opening z in the
side of the bowl is above the rotary drive.
7) Raise the lid 5 slightly with the handle 4 and press the release button 7
for the lock function. Close the lid 5.
8) Insert the plug on the mains cable 3 into a properly connected and earthed
mains power socket which supplies the voltage stated in the section "Technical
data". "
9) Allow the appliance heat up for 5 minutes. Press the
appliance on, and then the
. Keep the
button to start heating.
NOTE
► The fi rst time the appliance heats up, a small amount of smoke and
odour may be generated due to production-related residue. This is
normal and is completely harmless. Ensure suffi cient ventilation; for
example, by opening a window.
10) After heating, pull the plug out of the mains socket and allow the appliance
to cool down for at least 20 minutes.
11) Clean the appliance again with a damp cloth.
SHOM 1000 A1
" fl ashes on the display.
button followed by the Temp | Timer button
button pressed until "
button to switch the
" fl ashes on the display. Press the
GB │ IE │
11 ■