Herunterladen Inhalt Inhalt Diese Seite drucken

Technical Specifications - Kärcher WD 3 Battery Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für WD 3 Battery:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Finish operation
 Turn off the appliance.
Illustration
 Push the battery release button forwards and re-
move the battery from the device.
 If necessary, recharge battery (see chapter
"Charging battery").
Recommendation: Remove the battery from the de-
vice after completing the work.
Empty the container
Illustration
 Remove the appliance head and empty the reser-
voir.
Storing the appliance
Illustration
 Store the accessories on the appliance and store
the appliance in dry rooms.
Storing the battery
Note: Regardless of the vacuuming operations, the LC
display uses little battery capacity, regardless of wheth-
er the battery is inside or outside the device.
 See chapter "Charging process for a fast charger"
and "Battery operation".
Transport
CAUTION
Risk of personal injury or damage!
Mind the weight of the appliance during transport.
When transporting by hand
 Lift appliance by the carrying handle and carry it.
When transporting in vehicles
 Secure the appliance against shifting and tipping
over.
Care and maintenance
 Clean the device and accessory parts made of
plastic with a customary plastic cleaner.
 If required, rinse the container and accessories
with water properly and dry them before reuse.
Figure
-
 Only clean the cartridge filter under running water;
do not wipe or brush. Let it dry completely prior to
installation.
 Check charging contacts for soiling at regular inter-
vals and clean them as necessary.
 Check ventilation slits for soiling and clean them if
necessary.
Maintenance
The appliance is maintenance free.
Troubleshooting
Appliance is not running
Illustration
 The battery is not seated correctly in the battery
holder, insert the battery into the battery holder and
let it click into place.
 Charging state of the battery (see display) too low,
charge the battery if necessary.
 Defect battery or charger, replace battery or charg-
er with new accessory.
The device switches off automatically
 Device/battery is overheated, wait briefly to allow
device/battery to cool down.
 Container is full of water, which activated the float
tank and empties the container.
Decreasing cleaning power
 Accessories, suction hose or suction pipes are
clogged.
Remove the clog with a suitable aid.
Illustration
 Filter bag is full, install new filter bag.
Figure
-
 Cartridge filter is dirty, knock off dirt from cartridge
filter and clean under running water if necessary.
 Replace damaged cartridge filter.
Recommendation: Replace cartridge filter 1x per year.

Technical specifications

Battery and quick charger in scope of delivery of:
WD 3 Battery Set
WD 3 Battery Premium Set
(Li-ION 36-26 DW Battery / BC 36 V Quick charger)
Device
Rated power
Operating time with full charge
Protective class
Li-ION 36-26 DW Battery
Nominal voltage
Rated capacity
(according to IEC/EN 61690)
Rated capacity
(according to specifications of cell
manufacturer)
Nominal width
(in accordance with UN 3480)
Max. charging current
Battery type
Weight
Dimensions (l x b x h)
BC 36 V Quick charger
Max. charging current
Nominal voltage
Frequency
Length of mains cable
Charging time for empty battery
80% charged
100 % charged
Subject to technical modifications!
– 11
EN
W
300
min
15
III
V
36
Ah
2,5
Ah
2,6
Wh
90
A
4
Li-ION
kg
0,7
mm
133x88x71
A
2,5
V
100...240
Hz
50-60
m
1,5
min
min
45
min
65
19

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Wd 3 battery premium setWd 3 battery setWd 3 battery premium

Inhaltsverzeichnis