Introduction; Proper Use; Description Of Parts And Features; Scope Of Delivery - Parkside PBSG 95 A1 Bedienungs- Und Sicherheitshinweise

Introduction / General safety advice
Drill sharpening machine PBSG 95 A1

Introduction

Q
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.

Proper use

Q
The device is designed to sharpen steel drill bits
according to DIN 338, DIN 340, DIN 345,
DIN 1869 and DIN 1897 (MODEL Type N).
Carbide drill bits must not be milled with this device.
Any other use or modification to the device shall be
considered as improper use and could give rise to
considerable dangers. The manufacturer will not ac-
cept liability for loss or damage arising from improper
use. The device is not intended for commercial use.

Description of parts and features

Q
Rotary switch ("STONE" = Sharpening stone)
1
Sharpening stone cover
2
Sharpening stone cover screw
3
ON / OFF switch
4
Sharpening stone
5
Spring
6
Threaded connection
7
Metal washer
8
Sharpening stone holder
9
Ventilation slots
10
Drill guide
11
30 GB

Scope of delivery

Q
1 drill sharpening machine PBSG 95 A1
1 carrying case
16 titanium-coated HSS drills (see Fig. E)
2 spare sharpening stones
1 set of operating instructions

technical data

Q
Dimensions:
Weight:
Nominal voltage:
Nominal output:
Nominal rotation speed: 1350 rpm
For drill bits of diameter: 3–10 mm
Protection class:
Noise data:
Refers to A-weighted sound level.
Sound pressure level:
Sound level:
Uncertainty K:
Values determined in accordance with EN 61029.

General safety advice

Q
CAUtIon! In order to protect yourself
from the danger of electric shock, injury
or fire when using electrical power tools,
please observe the following basic safety precautions.
Read all these requirements before you use the elec-
trical power tool, and keep the safety advice in a
safe place.

Working safely

Q
1. keep your working area clean and tidy.
A disorderly working area can lead to accidents.
2. Be aware of the effects of the
environment.
D o not leave electrical power tools out in the rain.
128 x 173 x 202 mm
(w x h x d)
950 g
230–240 V ~ 50 Hz
95 W
II /
75.3 dB (A)
88.3 dB (A)
3 dB