Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Precautions - Ten-Haaft Oyster V Bedienungs- Und Montageanleitung

Vorschau ausblenden Andere Handbücher für Oyster V:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

1. GENERAL INFORMATION

1.2 Safety precautions

Read the operating manual and installation instructions carefully before installing the system.
These instructions describe the functions of the automatic satellite system and how to operate it.
Correct and safe operation of the system can only be ensured if both the installation instructions and the oper-
ating instructions are observed.
Your automatic satellite system is a smart satellite TV reception system that automatically aims itself at a preset
satellite as long as the system is located within the footprint of this satellite.
Please ensure that the system always has a clear view to the South. Seen from any location in Europe, all satel-
lites are more or less located in the South.
If the satellite's signal beam is interrupted by obstacles such as mountains, buildings or trees, automatic aiming
will not work and no TV signal will be received.
Before switching on the system, make sure that the opening antenna does not collide with any obstacles such
as branches or the garage door.
When installing, follow the instructions regarding the processing and curing times of the adhesive sealing com-
pound (not included in the supply) provided by the compound's manufacturer before moving the vehicle! If these
times cannot be observed for any reason, the mounting plate must be additionally secured with screws.
Depending on how your vehicle roof is made, it could be required to additionally secure the mounting plate using
the 6 supplied screws.
Caution:
The equipment is sensitive. Never tear on the antenna arm. Do not manually lift or turn the antenna arm, as it
must only be moved via the motor. The head bolts located to the left and right sides of the dish arm must not be
loosened, except there is any disorder. Only lift it by the plastic shield or the aluminium plate. The screws of the
housing must only be undone by the system manufacturer.
Caution:
Never reach into the area of the antenna unit while it is moving!
4

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis