Ten-Haaft Oyster V Bedienungs- Und Montageanleitung Seite 27

2. INSTALLATION
CONNECTIONS AT THE FEATUREBOX
Number Explanation
1
Antenna unit
2
Elbow fitting / roof feed-through
3
Mounting plate
4
Satellite harness from exterior unit
5
Control panel (if included in supply)
6
Fuses
Connect the power-supply cable provided here.
CAUTION!
Ensure that the other end of the power-supply cable is correctly connected to the onboard
electric system. If polarity is reversed, the FeatureBox may be destroyed!
7
Onboard system terminal 15: Ignition / D+ (optional, see 2.3)
Onboard system terminal 30: Vehicle ground / chassis
Onboard system terminal 31: Onboard system voltage 12/24V DC
8
Connecting cable (brown – battery negative)
9
Connecting cable (red – battery positive)
10
Connecting cable (black – safety circuit)
11
Ignition-switched terminal 15 of vehicle
12
Body battery
13
FeatureBox
14
Coaxial cable to receiver
15
Receiver / TV with integrated receiver
16
Connect the antenna connector of the coaxial cable leading to the antenna unit here.
17
2. TV set only with TWIN-LNB
11