Set-Up Location Requirements; Before Initial Use - Silvercrest SKT 2000 B1 Bedienungsanleitung

Set-up location requirements

■
GB
■
■
■
■
■
■
■
■

Before initial use

■
26
For safe and trouble-free operation of the appliance, the set-up location must fulfil
the following requirements:
The appliance may only be operated in a vertical position and fully assembled.
When using the feet, the feet must be placed on a firm, flat and even floor.
When mounting on the wall, the appliance must be mounted in a fixed position
on a vertical wall.
The minimum clearances between the housing and other objects must be main-
tained: 10 cm at the sides, 30 cm above, 15 cm below (with wall mounting) and
50 cm in front.
Ensure that air can always enter and escape freely. Otherwise, there could be
a heat build-up in the appliance.
Do not place the appliance in a hot, wet or extremely moist environment or in the
vicinity of flammable materials.
The mains power socket must be easily accessible so that the power cable can
be easily disconnected in an emergency.
Environmental temperature range: +5 to +45°C
Humidity (no condensation): 5–90%
DANGER
Fire risk through contact with materials!
There is a risk of fire if the heating elements come into contact
with flammable materials!
► Do not place the appliance in the vicinity of curtains and other flammable
materials.
► Do not allow flammable materials (e.g. textiles) to come into contact with
the appliance.
► Do not cover the appliance.
Remove all packaging materials and all transport locks from the appliance.
NOTE
► You may notice a slight smell when using the appliance for the first time.
This is normal and is completely harmless.
SKT 2000 B1