Handling And Operation; Switching The Appliance On And Off - Silvercrest SKT 2000 B1 Bedienungsanleitung

♦ Insert the supplied wall plugs
♦ Attach the two wall brackets
in the wall brackets
♦ To ensure that the appliance hangs vertically on the wall, the other two wall
brackets
Fig. spacers
♦ Attach the two wall brackets
short screws of the feet
♦ Hang the appliance into the wall brackets
NOTE
► To make the mounting more stable, the two spacers can also be screwed to
the wall.

Handling and operation

This section provides you with important information on handling and using the
appliance.
Switching the appliance on and off
♦ Insert the power plug into a mains wall socket.
♦ Set the main switch
♦ Set the main switch
SKT 2000 B1
15
16
should face upwards.
16
are used as spacers (see Fig. spacers).
16
16
3 .
to "I" to switch the appliance on.
13
to "O" to switch the appliance off.
13
into the holes.
using the supplied screws
to the bottom of the appliance using the
from above.
16
. The notches
14
29
GB