Overheating protection
GB
Frost protection function
32
The appliance is fitted with a thermostat-controlled overheating protector. If the
appliance becomes too hot internally, the heating element switches off automati-
cally. As soon as the appliance has cooled down, the heating element switches
back on.
WARNING
As a general rule, there is a reason for overheating! It can
mean a risk of fire!
►
Check that the appliance can sufficiently dissipate the heat generated: Is
the appliance covered or is it too close to a wall or other obstacle? Is the
fan blocked?
►
If possible, eliminate the problem or contact the Service Hotline (see the
section Service).
►
Even if you cannot find a cause, but the overheating protection triggers
again, you must return the appliance to Customer Services for inspection
or repair.
The appliance has a frost protection function that prevents the room temperature
from falling below the frost line.
♦
Turn the temperature control
♦
Set the main switch
♦
Select a heating level using the switches
♦
Switch on the fan using the fan switch
NOTE
►
As soon as the temperature around the appliance falls under 5°C, the
appliance will switch on automatically.
7
to the frost symbol
to "I" to switch the appliance on.
13
4
.
6
8
.
and
.
5
SKT 2000 B1