Select Heat Setting; Selecting The Temperature; Switching On The Fan - Silvercrest SKT 2000 B1 Bedienungsanleitung

Select heat setting

GB
■
■
■

Selecting the temperature

Switching on the fan

30
The heat setting determines how quickly the appliance warms up.
The appliance has three heat settings:
♦ Level 1: 750 watts
♦ Activate switch
5
♦ Level 2: 1250 watts
♦ Activate switch 4
♦ Level 3: 2000 watts
♦ Activate both switches
Choose level 1 if you want the appliance to heat slowly.
Choose level 3 if you want the appliance to heat quickly.
The appliance will not generate any heat if no switch is activated.
The temperature control
(continuous adjustment).
♦ Turn the dial clockwise to set a higher temperature; turn it anticlockwise to
set a lower temperature.
♦ Start by turning the temperature regulator
♦ When the room has reached the desired temperature, slowly turn the tem-
perature regulator
This means that the heating element is now switched off.
The control lamps integrated into the switches
♦ The heating element is now switched on and off automatically by the
thermostat and the temperature is kept constant.
The appliance has a fan which can be used to distribute heated air throughout
the room more quickly.
♦ Switch on the fan
NOTE
► The appliance can also be operated without the fan running. In this case, the
heat is concentrated more intensely around the appliance and is distributed
around the room less rapidly.
► The fan switches off automatically when the desired temperature has been
reached.
(the integrated control lamp activates).
(the integrated control lamp activates).
4
and 5 (the integrated control lamps activate).
7 allows you to select your desired temperature
7
anticlockwise until a slight click sound is heard.
(the integrated control lamp activates).
6
7 to the Max position.
4 and turn off.
5
SKT 2000 B1