SilverCrest SBTH 2.1 A1
LED indicator
Refer to the table below for the different statuses of the LED (3):
Switching on Bluetooth
function
Pairing mode
Standby mode (not
connected)
Connected
Battery status low
Battery is charging
Battery charging completed
Troubleshooting
The headphones cannot be switched on.
Charge the battery.
No audio signal for Bluetooth
Switch on the headphones.
Try to connect the headphones again to the external audio source.
56 - English
®
LED (3) lights up blue for approx. 2 seconds.
LED (3) alternates between flashing orange
and blue.
LED (3) flashes blue twice briefly every 5
seconds.
LED (3) flashes blue once briefly every 10
seconds.
LED (3) flashes orange twice briefly every 30
seconds.
LED (3) lights up orange continuously.
In charging mode: LED (3) goes out.
®
connection