Setting The Ctcss Code; Setting The Dcs Code; Disabling The Ctcss/Dcs Code; Channel Monitoring - Silvercrest SPMR 8000 A1 Bedienungsanleitung

Setting the CTCSS code

Setting the DCS code

Disabling the CTCSS/DCS code

To disable the CTCSS or DCS code, select the code "00". "OF" will appear on the menu.

Channel monitoring

You can use this function to search the current channel for any weak signals.

Press and hold the Menu
monitoring.

Press the Menu
During channel monitoring you can listen to any communications over the current
channel, independently of the set CTCSS or DCS code.
 Press the Menu
CTCSS code will flash on the display.
 Press the Up  [9] or Down  [6] button to set a different CTCSS code.
 Press the PTT button [11] to confirm the setting.
 Press the Menu
current DCS code will flash on the display.
 Press the Up  [9] or Down  [6] button to set a different DCS code.
 Press the PTT button [11] to confirm the setting.
button [5] and the Down  button [6] simultaneously to enable channel
button [5] to stop channel monitoring.
button [5] twice. The indication "CTCSS" and the current
button [5] three times. The indication "DCS" and the
SilverCrest SPMR 8000 A1
English - 21