Inhaltsverzeichnis; Safety Instructions - Max HS130 Betriebsanleitung

OPERATING and MAINTENANCE MANUAL
INDEX
1. SAFETY INSTRUCTIONS ..................................................3
2. SPECIFICATIONS AND TECHNICAL DATA .................... 7
3. AIR SUPPLY AND CONNECTIONS .................................. 8
4. INSTRUCTIONS FOR OPERATION .................................. 9
5. MAINTENANCE................................................................ 14
6. STORAGE ........................................................................ 14
7. TROUBLE SHOOTING/REPAIRS.................................... 14
BEFORE USING THIS TOOL, STUDY THIS MANUAL TO ENSURE SAFETY WARNING AND IN-
STRUCTIONS.
KEEP THESE INSTRUCTIONS WITH THE TOOL FOR FUTURE REFERENCE.
WARNING

1. SAFETY INSTRUCTIONS

WARNING
TO AVOID SEVERE PERSONAL INJURY
OR PROPERTY DAMAGE
BEFORE USING THE TOOL, READ CARE-
FULLY AND UNDERSTAND THE FOLLOW-
ING "SAFETY INSTRUCTIONS". FAILURE
TO FOLLOW WARNINGS COULD RESULT
IN DEATH OR SERIOUS INJURY.
ENGLISH
PRECAUTIONS ON USING THE TOOL
1. WEAR SAFETY GLASSES OR GOGGLES
Danger to the eyes always exists due to the
possibility of dust being blown up by the ex-
hausted air or of a fastener flying up due to
the improper handling of the tool. For these
reasons, safety glasses or goggles shall al-
ways be worn when operating the tool.
The employer and/or user must ensure that
proper eye protection is worn. Eye protection
equipment must conform to the require-
ments of Council Directive 89/686/EEC of 21
DEC. 1989 (the American National Stand-
ards Institute, ANSI Z87.1) and provide both
frontal and side protection.
The employer is responsible to enforce the
use of eye protection equipment by the tool
3