Lenze E82ZAFPC010 Montageanleitung Seite 55

The connection of the PROFIBUS bus system is shown in the general layout drawing.
2
Fig. 1 Example: PROFIBUS with RS485 wiring (without repeater)
No. Element
1 Host
2 Bus cable
3 PROFIBUS slave

Note!
When using a repeater, max. 125 nodes can communicate via the PROFIBUS.
EDK82ZAFPC-010 DE/EN/FR 6.0
1
3 3
8200 vector
8200 vector
+
E82ZAFPC010
E82ZAFPC010
2
0 m
1200 m
Note
E.g. PC or PLC with PROFIBUS master interface module
Connects the PROFIBUS master interface module to the function
modules.
The baud rate depends on the length of the bus cable (57).
Applicable standard device (45)with function module
Activate bus terminating resistors at the first and last physical
node (68).

Electrical installation
Wiring to a host
3
8200 vector
+
+
E82ZAFPC010
2
6
E82ZAFP005
55