Manual Tune; Channel Scan - Teac CR-H500DNT Bedienungsanleitung

DAB menu items
Station List
See "Using the Channel List" on page 30.
Local Scan
See "Channel Scan" below.
Full Scan
See "Channel Scan" below.

Manual Tune

See "Manual Tune" on the right column.
Preset Tune
See "Preset Tune" on page 33.
DRC
See "DRC value" on page 34
Station Order
See "Station order" on page 34.
Main Menu
See "Main Menu" on page 35.

Channel Scan

If you move the unit to a new area or you want to check
to see if there are new channels available in your area,
you can scan DAB bands to find new channels.
1 Open the DAB menu.
Press the MENU button while DAB is selected as the
source.
›Station List
Local Scan
Select "Local Scan" or "Full Scan".
2
Turn the MULTI JOG knob to select the item, and then
press the ENTER button.
32
Using DAB Menu (2)
Local Scan
The unit will scan the DAB bands between 10A and
13F and add the channels found to the channel list.
Full Scan
The unit will scan all the DAB bands and add the
channels found to the channel list. Try this if "Local
Scan" does not find the channels you want.
Manual Tune
1 Open the DAB menu.
Press the MENU button while DAB is selected as the
source.
2 Select "Manual Tune".
Turn the MULTI JOG knob to select the item, and then
press the ENTER button.
›Station List
Local Scan
Full Scan
›Manual Tune