ASSEMBLY
Note:
We do not recommend attempting to assemble the CVP-30
alone. The job can be easily accomplished, however, with
only two people.
I Open the box and remove all the parts.
Assemble the side panels (E) and feet (C).
I
* When installing the joint connectors in the holes in the side panels
(E), make sure that they are rotated to the position shown in the
illustration.
Attach the side panels (E) to the center
I panel (A).
Attach front bracket (B) between
□
side panels (E).
MONTAGE
Hinweis:
Wir raten davon ab, die Montage und Aufstellung des
CVP-30 alleine auszuführen. Zwei Personen können das
CVP-30 jedoch problemlos zusammenbauen und aufstellen.
Versandkarton öffnen und alle Teile
I auspacken.
Die Standbeine (E) und Füsse (C)
verschrauben.
* Beim Einsetzen der Verbindungsstücke in die Standbeine (E)
sicherstellen, daß sie in die Position gedreht sind, wie in der
Abbildung gezeigt.
Die Standbeine (E) mit dem Auflagebrett (A)
verschrauben.
Die Strebe (B) zwischen den
O
Standbeinen anbringen.