Warranty - Beurer FT 50 Bedienungsanleitung

• The water-tight lens is dirty.
- Clean the lens properly with a soft cotton cloth, which
has been moistened with some disinfectant.
• The lens is damaged.
- Consult your dealer or our customer service depart-
ment.
2. The measured temperature is outside the measuring range.
• The scanning sequences were not carried out on the
temple/forehead.
- This may happen when the scanning sequence is
started before the Forehead Thermometer is placed
correctly on the temple and the ambient temperature
is not within the measuring range (see "Technical
Specifications"). Ensure that the SCAN-button is not
released before the thermometer has been drawn
completely across the forehead.
3. Warning "weak battery"
• The battery is too weak for a measurement to be made.
- replace battery (see "Replacing the battery").
Our product is guaranteed for 2 years against material defects or
flaws.
This guarantee does not apply to:
• damage resulting from improper use
• parts affected by wear and tear
• faults already known to the customer at the time of purchasing
the product
• faults of the customer.
The customer's statutory rights are not affected by the guarantee.
When putting in a claim under guarantee, the customer must
provide proof of purchase. Guarantee claims are to be sent to
Beurer GmbH + Co. KG, Söflinger Strasse 218, 89077 Ulm, GERMANY,
within a period of 2 years after purchasing the product. Where a
claim is justified, the customer has the right to the product being
repaired in our own workshop or in a workshop authorised by us.
The customer has no right to further claims (on the basis of the
guarantee).

Warranty

20