Beurer FT 50 Bedienungsanleitung Seite 13

1. The Forehead Thermometer is a sensitive electronic device.
Please handle carefully and avoid exposure to mechanical
shocks.
2. Except for the sensor, the thermometer is NOT water-tight. For
this reason, avoid direct contact with water or other liquids.
3. Do not expose the thermometer to direct sunlight.
4. Store the thermometer in its case out of the reach of children.
5. The Forehead Thermometer has been designed for practical
use, but is not meant to replace a visit to the doctor.
6. This instrument is not intended for commercial or clinical use.
7. The forehead thermometer is designed to measure human
forehead temperatures only. DO NOT USE IT to measure the
body temperature in the rectal region, under the arms, in the
mouth or other areas.
8. The following may affect the accuracy of measurements:
increased sweat production on the forehead; medications
which cause constriction of the blood vessels; irritation of
the skin.
9. Avoid touching the sensor tip of the device so that the
accuracy of measurements is not affected by warming of the
sensor casing.
10. Clean the water-tight sensor with its unique construction
every time after use with a soft cotton cloth which has been
moistened with disinfectant.
When exposed to changing room temperatures, the device
should at least remain in the same room for 20-30 minutes
prior to the measurement.
The enclosed cleaning cloth will help you to keep the device
and in particular the measuring tip clean always.
CAUTION
13