KERN MAP 80K1S Bedienungsanleitung Seite 22

Counting mode
1. Call mode
2. How to define the strength limit
22
 Switch on the device by pressing the
 Press mode key repeatedly until the count display ap-
pears.
The currently set strength limit is displayed.
To change, press the mode key repeatedly until the de-
sired strength limit is displayed. Ensure that the capacity of
the spring is not exceeded (e. g. strength limit for 20 kg
spring set < 20 kg).
Confirm by pressing the set key; count display appears.
/zero key.
MAP-BA-e-1212