5. Description des caractéristiques
La workstation DJ pour CD et MP3 i.Scratch dispose de l'équipement suivant :
•
compatible à CD audio, CD-R, CD-RW et CD MP3
•
Recherche d'une plage ou d'un répertoire
•
Grand écran LC avec affichage des tags ID3 et du texte de CD
•
Jog wheel XXL avec effet scratch
•
Fonctions de démarrage rapide et FAST CUE
•
Seamless-LOOP et RELOOP
•
Mémoire anti-chocs
•
Fonction PITCH et PITCH BEND avec plage de réglage ajustable
•
Fonction TEMPO LOCK (conserver la hauteur tonale)
•
Possibilité d´écouter un titre individuel ou tout le CD
•
4 sampler 5 secondes indépendants et 4 points CUE indépendants
•
Fonctions Fader Start et RELAY
•
Sortie audio analogique et numérique
•
Boîtier poli miroir
58
14. Troubleshooting
By purchasing this CD player, you have acquired a product that has been designed according to state of the art
technology and that is operationally reliable. Nevertheless, problems or faults may occur. Therefore, we would like
to describe here how to eliminate possible faults:
Please observe the safety instructions!
No display after the mains switch POWER (26) was switched on.
•
The mains cable has not been plugged into the socket correctly
•
The mains cable is not correctly inserted in the mains connection AC IN (27).
The CD is not being played back.
•
CD has not been put in properly
•
The CD is dirty
•
The inserted CD is not an audio CD, a CD-R, a CD-RW or an MP3-CD.
•
Inserted MP3 was not recorded in a compatible format.
There are skips when playing back CDs
•
The CD is dirty
•
The CD is scratched
•
The CD has a press defect
•
During playback, the device is subjected to vibrations.
The slider PITCH (15) does not function.
•
The PITCH function is deactivated
No sound audible
•
A device in the playback chain is not turned on.
•
The wrong input was selected on the amplifier/mixing desk.
•
The volume control of the amplifier/mixing desk or the final stage is turned to „MINIMUM".
One channel does not work.
•
A cinch cable came off of the audio output of the CD player or the amplifier/mixing desk input.
•
The balance control was set wrongly on the amplifier/mixing table
•
The cinch connection cable is defect
All other repairs than the ones described above must be carried out by an authorised specialist
only.
51