Inhaltsverzeichnis - LEITZ ILAM EASY A3 Gebrauchsanweisung

Contents
For your safety .............................................................. 5
Tips for good results ..................................................... 5
Recommended materials .............................................. 5
Laminating, simple as that! ........................................... 6
Clearing a jammed pouch ............................................. 7
Other problems ............................................................. 7
Maintenance and care .................................................. 7
3 year guarantee ........................................................... 8
Specifications ................................................................ 8
Disposal of old equipment ............................................ 8
4 4

Dear customer
Thank you for choosing a quality laminator by Leitz.
Please read these operating instructions carefully in
order to understand how to use the device safely. Keep
these operating instructions with the device at all times
as they are part of the product.
Overview of your laminator
Open out the front cover page where you will find a
diagram that you can keep for reference while reading
these operating instructions.
Input tray - Here you insert the pouch with the

document to be laminated centrally.
Output tray - This is where the laminated docu-

ment exists.
Release lever - In case of a pouch jam you can

pull out the pouch while pressing this lever down.
Mains cord/plug - Connect this with a suitable

mains outlet. Read the safety precautions in this
manual.
PHOTO button - Use this to switch the PHOTO

setting on (button lights) and off (button does not
light). The PHOTO setting provides a slightly higher
laminating temperature to improve the results using
thicker materials like photographs, coated inkjet
and laser papers.
On/Off button with READY indicator - Use

this to switch the laminator on and off. After switch-
ing on, the button initially lights red (laminator
heats up). When the working temperature has been
reached, the button lights green. The red light may
come up again during the lamination process or
after activating the PHOTO setting. This is normal
behaviour. Just wait with the next pouch until the
button lights green again.