Laminating, Simple As That - LEITZ ILAM EASY A3 Gebrauchsanweisung

1
2
3
4
5
6


Laminating, simple as that!

1. Setting up and switching on the laminator
•
Set the laminator up on a stable surface (e.g. table) close to a
mains outlet. Ensure there is sufficient space behind the unit so
the laminated item is not blocked and can easily be removed.
•
Connect mains cord with mains socket.
•
Press the On/Off button ( ).
The On/Off button lights up red and the laminator heats up. When
the working temperature has been reached, the button lights green
(READY).
2. Choose PHOTO setting if neccessary
•
If you want to laminate thicker materials like photographs,
coated inkjet and laser papers press the PHOTO button
that it lights.
When laminating thinner materials (e. g. writing paper) the button
should not light.
3. Inserting the document into the pouch
•
Insert the document into the laminating pouch. Align it to the
upper side as much as possible and maintain even margins on
both sides.
Pouches that are too large can be trimmed to size after lamination.
4. Laminating
Important: Lamination is permanent. Before laminating unique
pieces, test the process with a similar item.
•
When the On/Off button ( ) lights green, insert the pouch with
the sealed side first and centrally into the input tray until it gets
pulled in.
The laminated document automatically exits at the output tray. You
can improve the result by holding the document at the same time
straight and level with one hand.
5. Letting the laminated document cool down
•
Remove the laminated document and leave it on a flat surface
for one minute to cool down.
•
When you have no further documents to laminate, switch off the
laminator.
, so
