Werbung
ASM 14-2; 14-2 PC
7. Assembly
Fitting the planetary gear
1
1. Attach the planetary gear (1) to the motor.
The thrust disc must be fixed in position in the toothing of the gearbox housing.
If the thrust washer changes position, a scratching noise will be heard during operation.
2. Grease the bush (2) [grease 0 40 12 301 00 0] and place it in position on the planetary gear.
Check the installation position. The curve of the bush should face the switch.
C-SC_CSSM
VERSION 1.0
2
2015-04-08
All rights reserved by FEIN, especially in case of patent applications.
FEIN retains all rights of disposal, such as copying and circulation.
Tools:
- Grease (0 40 12 301 00 0)
23/30
Werbung
