ASM 14-2; 14-2 PC
7. Assembly
Fitting the tool holder
1
2
1. Fit the circlip (1) on the tool holder.
2. Fit the discs (2) on the tool holder.
Basic setting = 0.8 mm
3. Fit the grooved ball bearing (3) onto the tool holder.
4. Fit the discs (4) and the circlip (5).
C-SC_CSSM
VERSION 1.0
3
2015-04-08
4
5
All rights reserved by FEIN, especially in case of patent applications.
FEIN retains all rights of disposal, such as copying and circulation.
Tools:
- Circlip pliers:
opener / stepped 3-10mm
19/30