Werbung
ASM 14-2; 14-2 PC
7. Assembly
Fitting the tool holder
6
2
5
4
3
1
1. Insert the ball (1) in the hole (2).
2. Slide the sleeve (3) over the tool holder.
3. Insert the spring (4) in the sleeve.
4. Place the ring (5) on the sleeve and press down.
5. Fit the snap ring (6).
C-SC_CSSM
VERSION 1.0
6
2015-04-08
All rights reserved by FEIN, especially in case of patent applications.
FEIN retains all rights of disposal, such as copying and circulation.
Tools:
- Vice
- Snap ring pliers
20/30
Werbung
