Werbung
ASM 14-2; 14-2 PC
7. Assembly
Fitting the motor and clutch
1
1. Insert the electronics with the motor (1) into the motor housing.
Insert the flange such that the curved side faces down towards the operator side.
2. Insert the clutch (2).
3. Fit the cover (3).
4. Fit the housing insert (4).
5. Hook the two springs (5) in place.
C-SC_CSSM
VERSION 1.0
4
2015-04-08
2
3
All rights reserved by FEIN, especially in case of patent applications.
FEIN retains all rights of disposal, such as copying and circulation.
5
Tools:
- Long-nosed pliers
24/30
Werbung
